Advanced Wash, Correcting Compound, Polish & Wax (9-Step Service)

For boats showing light oxidation, minor surface haze, or fading.

This service is ideal for vessels with light oxidation that need surface correction, refined gloss, and durable wax protection.

Step 1: We begin by pressure rinsing the vessel using a wide fan tip from a safe distance (24–36 inches) to remove loose salt, debris, and buildup without damaging gelcoat, decals, or trim.

Step 2: We apply Star Brite Sea Safe Wash using a Griot’s Garage Foam Cannon, covering the entire exterior with a thick, even layer of soap and allowing it to dwell to soften grime.

Step 3: Our detailers wash the entire exterior by hand using soft-bristle brushes, working from the top down. We also spot-treat windshields, brows, and bows with Griot’s Garage Bug & Smudge Remover, and use Mr. Clean Magic Erasers around caulk seams, rub rails, and non-skid edges to remove stubborn buildup. Then, the vessel is thoroughly rinsed to remove all soap and residue.

Step 4: We perform a complete decontamination pass using a Griot’s Garage Fine Surface Prep Mitt lubricated with soapy water, removing bonded contaminants like water spots, oxidation film, and surface haze. Once decontamination is complete, the vessel is thoroughly rinsed to remove any remaining soap or loosened debris in preparation for drying.

Step 5: The entire boat is hand-dried using microfiber towels, with extra attention given to tight areas like cleats, hatches, and rail bases to eliminate streaks and prevent trapped moisture.

Step 6: We cut with Meguiar’s M67 Marine & RV 1-Step Compound using a Griot’s Garage Random Orbital Polisher with an Orange BOSS Correcting Pad, working one section at a time to remove oxidation and restore surface gloss. Each area is immediately wiped off with microfiber towels to reveal a clean, even finish.

Step 7: We polish the exterior using Meguiar’s M205 Professional Ultra Finishing Polish on a Black BOSS Perfecting Pad, working in overlapping passes. After polishing each section, we remove residue by hand with microfiber towels, enhancing clarity and gloss.

Step 8: We wax with Meguiar’s Flagship Premium Marine Wax using the same polisher equipped with a Red Wax Pad, then buff it off by hand with microfiber towels to protect the surface and lock in shine.

Step 9: To complete the service, we clean all glass surfaces using Griot’s Garage Ultra-Premium Glass Cleaner and Imar Strataglass Protective Cleaner for soft vinyl enclosures, such as isinglass or Strata glass, ensuring streak-free clarity without compromising material integrity.

Products Used:
• Star Brite Sea Safe Wash – Applied with foam cannon, agitated with soft-bristle brush
• Griot’s Garage Bug & Smudge Remover – For windshield, bow, and brow splatter
• Mr. Clean Magic Eraser – For caulk seams, rub rails, and non-skid edge work
• Griot’s Garage Fine Surface Prep Mitt – For bonded contaminant removal
• Meguiar’s M67 Marine & RV 1-Step Compound – Applied with DA polisher + Orange BOSS Correcting Pad
• Meguiar’s M205 Professional Ultra Finishing Polish – Applied with DA polisher + Black BOSS Perfecting Pad
• Meguiar’s Flagship Premium Marine Wax – Applied with DA polisher + Red Wax Finishing Pad
• Microfiber Towels – For drying and removal
• Griot’s Garage Ultra-Premium Glass Cleaner – For hard windows and polycarbonate
• Imar Strataglass Protective Cleaner – For cleaning and protecting soft enclosure windows (Isinglass, Strata glass)

Pricing:
• Open Bow: $30 per foot
• Cabin House: $35 per foot